2 thoughts on “wholesale oversized costume jewelry How to pack a ribbon”
Hazel
wholesale primium jewelry beads in us The system of bow:
1. Put the two ends of the ribbon.
2. Press the middle position with your hands and bend the silk on the right from time to time.
3. Fold the ribbon on the left from the top and hold it with the thumb of the right hand.
4. Wind by the upper above the ribbon circle of the right side, and then pass through the circle of the left ribbon.
5. The ribbon circle on the right side is placed on the left, and the ribbon passed through the circle around the left ribbon is tightened on the right side.
6. Pour the two ends of the ribbon into a favorite shape, and the bow is completed.
This is the most basic ribbon system. When the position of the cross changes, the feelings expressed by the gift will also change. It can be changed to the card or small items to change the fun in the base to experience the fun in the foundation. The cross -shaped ribbon is very concise, which can set off the grace of the gift itself.
This of the ten -shaped system
1. Prepare a total of 4 times the ribbon with a long width height of the box. Essence
2. First, leave the length necessary for the bow to beat the bow, and then go around.
3. Turn it to the middle part, two ribbons cross the horizontal direction, and then walk around.
4. Put on the ribbon that was first stayed as shown in the figure.
5. Put the ribbon worn from below and tie it.
6. In this way, the simple and beautiful bow is good.
wholesale peruvian jewelry lots Answer, on December 12, 2016, this is a very attractive ribbon system, which can express the taste of the presencer. Double -diagonal line method 1. Preparation is longer than the box.
wholesale primium jewelry beads in us The system of bow:
1. Put the two ends of the ribbon.
2. Press the middle position with your hands and bend the silk on the right from time to time.
3. Fold the ribbon on the left from the top and hold it with the thumb of the right hand.
4. Wind by the upper above the ribbon circle of the right side, and then pass through the circle of the left ribbon.
5. The ribbon circle on the right side is placed on the left, and the ribbon passed through the circle around the left ribbon is tightened on the right side.
6. Pour the two ends of the ribbon into a favorite shape, and the bow is completed.
This is the most basic ribbon system. When the position of the cross changes, the feelings expressed by the gift will also change. It can be changed to the card or small items to change the fun in the base to experience the fun in the foundation. The cross -shaped ribbon is very concise, which can set off the grace of the gift itself.
This of the ten -shaped system
1. Prepare a total of 4 times the ribbon with a long width height of the box. Essence
2. First, leave the length necessary for the bow to beat the bow, and then go around.
3. Turn it to the middle part, two ribbons cross the horizontal direction, and then walk around.
4. Put on the ribbon that was first stayed as shown in the figure.
5. Put the ribbon worn from below and tie it.
6. In this way, the simple and beautiful bow is good.
wholesale peruvian jewelry lots Answer, on December 12, 2016, this is a very attractive ribbon system, which can express the taste of the presencer. Double -diagonal line method 1. Preparation is longer than the box.